Group I Technical Data Package
Submit Group 1 Technical Data Package 30 days after receipt of the Notice
to Proceed. The data package includes system descriptions, analyses,
calculations used in sizing equipment specified, manufacturer's data for
all equipment and end devices provided under these specifications.
Descriptions and calculations shall show how the equipment will operate as
a system to meet the performance of this specification. The software data
package consists of descriptions of the operation and capability of all
subsystem software. Key control plan for all Contractor provided
enclosures requiring locks and all keyed control switches. The key control
plan shall include the following: 1) Procedures that will be used to log
and positively control all keys during installation. 2) A listing of all
keys and where they are used. 3) A listing of all persons allowed access
to the keys. Quality Control Plan for approval. The QC Plan shall
describe all Contractor and subcontractor activities during design,
manufacture, and installation of the ACPCS. The QC Plan shall include all
Contractor and subcontractor technical data reviews, inspections,
certifications, and approvals and the QC documentation procedures.
Certifications from the manufacturers of the following equipment shall be
submitted with the data package: Active Vehicle Barrier, Traffic Controller
Unit, Traffic Arm, Warning Signal, Annunciator, Sequence of Events
Recorder, Alarm Panels, CCTV system, and all sensors including over speed,
wrong-way, vehicle presence, intrusion detection, and tamper. The data
package shall include the following:
a. Functional System Block Diagram, identifying all major equipment,
interconnecting wire types and quantities, approximate distances, and
b. Block and Wiring Diagrams of each subsystem.
c. Drawing showing layout and dimensions of the Gatehouse Control
Console with the Alarm Display, CCTV monitor and controls, and the
barrier Master Control Panel.
d. Drawing showing equipment layout in the Gatehouse including the
Gatehouse Control Console, UPS, and other hardware intended to be
located in the Gatehouse.
e. Drawing showing equipment layout around the active vehicle barriers
including the active vehicle barriers, active vehicle barrier control
box(es), vehicle presence detectors, Stop Lines, Traffic Signals,
Wig-Wag warning signals (if applicable), and Traffic Arms (if
f. Device wiring and installation drawings.
g. Point to point wiring diagram of complete interconnected system
including database listing of wire numbers, to and from designations,
and wire characteristics.
h. Details of connections to power sources, including power supplies
i. Details of surge protection device installation.
j. Intrusion Detection System block diagram and sensor layout.
SECTION 34 41 26.00 10 Page 15