Crestron
Commercial
Lighting Design Guide
DIN Rail Products
Doc. Doc 4775A
46
Cresnet® Terminal Block for CAEN Automation Enclosures
The CAEN-BLOCK is a Cresnet terminal block designed specifically for
Crestron lighting and automation systems to link remote enclosures to
the central PAC2 or PAC2M control system. The CAEN-BLOCK mounts at
the bottom of each CAEN enclosure that does not contain a control
system to provide Cresnet and override signal connectivity for CLX-series
lighting control modules. The CAEN-BLOCK serves as a parallel
distribution block for multiple Cresnet cables, and especially provides for
connection of the Cresnet and override signal cables from the central
control system.
Crestron Network Block (CAEN-BLOCK) provides four termination ports
for Cresnet wiring. The unit has two 5-pin connections that provide
communication to the modules. Contact closure signals that produce an
emergency override of the modules are also sent through these
connections
.
When a switch contact closure is received between the "G" connections
and the "L" or "R" connection (R is used in a double-wide enclosure only)
on the CAEN BLOCK, the respective left or right column of modules will
set the lights to the programmed emergency override state.
The CAEN-BLOCK unit is a pass-through device with a Cresnet power
factor of zero.
Network Block Dimensions and Weight
Height Width
Depth
Weight
2 in
6 in
1 ¾ in
3.4 oz
NOTES:
A module terminal block (CLT-series device) must be ordered for each module. The corresponding CLT terminal block
is installed in the enclosure for high voltage wire termination. Each terminal block includes a terminal rail for mounting the
block in the enclosure. Terminal rails and blocks do not occupy a module space within an enclosure.
CAEN-series enclosures are required to install CLX-series lighting modules.
Summary :
Doc 4775A 46 Cresnet® Terminal Block for CAEN Automation Enclosures The CAEN-BLOCK is a Cresnet terminal block designed specifically for Crestron lighting and automation systems to link remote enclosures to the central PAC2 or PAC2M control system. Network Block Dimensions and Weight Height Width Depth Weight 2 in 6 in 1 ¾ in 3.4 oz NOTES: A module terminal block (CLT-series device) must be ordered for each module.
Tags :
cresnet,terminal,enclosure,modules,caenblock,oerride,control,lighting,caen,module,connections,crestron,system