16
T
T
H
HE
ER
RM
MO
OS
ST
TA
AT
TIIC
C
M
M
I
IX
XIIN
NG
G
V
V
A
AL
LV
VE
ES
S
RINSING KIT = Exclusive advantage for preventive or curative treatment
Take off the knob, cover, and
screw.
Remove the cover/cartridge
from its casing.
Place the flat washer
(included in package)
on the device's neck.
Place the cover/cartridge unit
upside down on the device
and flat washers.
Tighten the temporary screws
(included the package). The
valves act now as
a "dummy valve".
PROTECTION AGAINST LEGIONELLA :
With the mixing valve as it is, you can :
·
adjust the temperature up to 55°C in the primary loop (recommended temperature),
·
adjust the temperature to 38°C in the secondary loop (for example showers),
·
carry out a thermal shock: loosen the handle and position it a 70°C (without dismantling the mixing valve, the cartridge or
the handle).
And/or by placing the cartridge in the "RINSE" position (turned over and fastened upside down - see simple standard
operating procedure supplied in box), you can also :
·
rinse the mixing valve and piping (important operation before activation).
·
inject a disinfectant (chlorine) into the water supply system without danger of damaging the thermostatic mechanism, as it is
no longer in contact with the water.
·
carry out thermal shock at over 70°C, without danger of damaging the thermostatic mechanism as it is no longer in contact
with the water.
flow rate (L/min)
diameter no of points*
finish
code ref. 10/50°C
code ref. 30/70°C
weight
mini 3 - maxi 56
M 3/4"
20x27
1 to 7
grey epoxy
TX91E
TX91E37
1,8 kg
mini 3 - maxi 56
M 3/4"
20x27
1 to 7
chrome
TX91C
TX91C37
1,8 kg
mini 3 - maxi 80
M 3/4"
20x27
1 to 10
grey epoxy
TX92E
TX92E37
1,8 kg
mini 3 - maxi 80
M 3/4"
20x27
1 to 10
chrome
TX92C
TX92C37
1,8 kg
mini 3 - maxi 120
M 1"
26x34
1 to 15
grey epoxy
TX93E
TX93E37
2,8 kg
mini 3 - maxi 120
M 1"
26x34
1 to 15
chrome
TX93C
TX93C37
2,8 kg
mini 5 - maxi 175
M 1"1/4
33x42
1 to 21
grey epoxy
TX94E
TX94E37
4,6 kg
mini 5 - maxi 175
M 1"1/4
33x42
1 to 21
chrome
TX94C
TX94C37
4,6 kg
mini 5 - maxi 260
M 1"1/2
40x49
1 to 32
grey epoxy
TX95E
TX95E37
7,8 kg
mini 5 - maxi 260
M 1"1/2
40x49
1 to 32
chrome
TX95C
TX95C37
7,8 kg
mini 6 - maxi 400
M 2"
50x60
1 to 50
grey epoxy
TX96E
TX96E37
10,0 kg
mini 6 - maxi 400
M 2"
50x60
1 to 50
chrome
TX96C
TX96C37
10,0 kg
* For information only. Take the coefficient of combined flow into consideration.
SPECIFICATIONS :
Knob with built-in locking - front protective cover (grey PVC). - Blue calibrated knob.
Standard temperature range : 10° to 50°C.
Available by request for no extra charge : 5° to 40°C, 30° to 70°C.
Flow rates under 3 dynamic bar. 1 upper output.