LattisLink 2800A 10BASE-T Workgroup Concentrator User’s Guide
Document source : www.retrocomputing.net
Installation
2-2
893-541-A
s
Ventilation
For proper cooling of the Model 2800A, make sure there is adequate
airflow around the concentrator. Air enters through both sides and flows
out the back. Leave at least two inches of space on all sides of the
Model 2800A for proper airflow and cooling.
s
Humidity
Do not allow humidity in the area to be higher than 85% relative humidity,
noncondensing.
s
Lack of dust
Avoid installing the Model 2800A in extremely dusty locations.
s
Electromagnetic "noise"
Avoid installing the Model 2800A within six feet of equipment such as
photocopy machines, arc welders, or other equipment that creates
electromagnetic "noise."
s
Wiring hardware
Have wiring hardware, such as punch-down blocks or patch panels, in
place before you install the Model 2800A.
s
Power source
Have a power outlet within six feet of the intended installation site.
Package Contents
When you unpack the equipment, check to see that you have the following
items (see Figure 2-1):
s
Model 2800A Concentrator
s
Two rack-mounting brackets
s
Two wall-mounting brackets
s
Installation hardware:
Five #4-40 x 5/16" flat-head Phillips screws for attaching mounting
brackets (one extra)
Summary :
Installation 2-2 893-541-A s Ventilation For proper cooling of the Model 2800A, make sure there is adequate airflow around the concentrator. Package Contents When you unpack the equipment, check to see that you have the following items (see Figure 2-1): s Model 2800A Concentrator s Two rack-mounting brackets s Two wall-mounting brackets s Installation hardware: Five #4-40 x 5/16"
Tags :
2800a,model,humidity,installation,brackets,equipment,hae,hardware,two,installing,concentrator,see,within