LattisLink 2800A 10BASE-T Workgroup Concentrator User’s Guide
Document source : www.retrocomputing.net
Ethernet Station Connections
893-541-A
3-3
Cable Connections in the Work Area
The Ethernet station can have one of two types of network interface card
installed:
s
An AUI network interface card
s
A 10BASE-T network interface card
If you are connecting an Ethernet station with an AUI network interface card,
you must use an external 10BASE-T trans-ceiver, such as the SynOptics Model
508A or Model 928. To connect the station to the premises cabling, follow
these steps:
1.
Attach an AUI cable (e.g. Model 903A) from the interface card to the
AUI port of an external 10BASE-T transceiver (e.g. Model 508A), as
shown in Figure 3-2, or attach a SynOptics Model 928 Integrated
Transceiver directly to the interface card (see Figure 3-3).
Figure 3-2. Connecting a Model 508A 10BASE-T Transceiver
Summary :
Ethernet Station Connections 893-541-A 3-3 Cable Connections in the Work Area The Ethernet station can have one of two types of network interface card installed: s An AUI network interface card s A 10BASE-T network interface card If you are connecting an Ethernet station with an AUI network interface card, you must use an external 10BASE-T trans-ceiver, such as the SynOptics Model 508A or Model 928.
Tags :
interface,model,card,network,aui,transceier,10baset,station,508a,figure,ethernet,synoptics,connections