LattisLink 2800A 10BASE-T Workgroup Concentrator User’s Guide
Document source : www.retrocomputing.net
Network Configurations and Cable Connections
3-4
893-541-A
Figure 3-3. Connecting a Model 928 Integrated 10BASE-T Transceiver
2.
Connect a UTP patch cable (e.g. Model 910) from the RJ-45 port of
the 10BASE-T transceiver to the RJ-45 connector of the wall outlet, or
attach the captive cable on the Model 928 to the wall outlet (see
Figures 3-2 and 3-3).
If a 10BASE-T network interface card is installed in the Ethernet station, you
do not need the external 10BASE-T transceiver and AUI cable. To connect an
Ethernet station with a 10BASE-T network interface card, follow these steps:
1.
Connect one end of a UTP patch cable (e.g. Model 910) to the RJ-45
port of the 10BASE-T interface card (see Figure 3-4).
2.
Connect the other end to the RJ-45 connector of the wall outlet (see
Figure 3-4).
Repeat steps 1 and 2 for each type of station until all Ethernet stations are
connected to the UTP horizontal distribution cabling through the RJ-45
connectors of wall outlets.
Summary :
Network Configurations and Cable Connections 3-4 893-541-A Figure 3-3. Model 910) from the RJ-45 port of the 10BASE-T transceiver to the RJ-45 connector of the wall outlet, or attach the captive cable on the Model 928 to the wall outlet (see Figures 3-2 and 3-3).
Tags :
10baset,cable,rj45,wall,connect,model,ethernet,network,outlet,utp,figure,interface,transceier