18 AccelePort C/CON-8, C/CON-16 and C/CON-16 Rack Concentrators
Connecting the Power Supply
C/CON Concentrators
The C/CON concentrator requires an external power supply (provided with the
unit). In the USA and Canada, a domestic 60 Hz linear power supply (Digi part
number 10000481) is provided. For other countries, a universal 50/60 Hz, 90 to
270 volt switching power supply (Digi part number 10000985) is provided.
1.
Make sure the Power switch on the concentrator is in the OFF ("
O
")
position.
2.
Plug the AC connector of the power supply into a standard grounded wall
outlet. Plug the DIN connector into the receptacle labeled "Power" on the
concentrator.
3.
Turn the concentrator's Power switch to the ON ("
I
") position. The lights
on the front panel should flash as the concentrator executes its Power-On
Self Test (POST) sequence, and the seven-segment LED display will
eventually display "P1" to indicate that the POST sequence passed.
(If you have already connected the concentrator to a host adapter and
installed the device driver software, the display will show "AC" to indicate
that it is on-line and has received instructions from the host adapter.)
DO NOT stack power supplies on top of each other! This
can lead to thermal damage to the power supply. Place
power supply at least 4 inches from other power supplies or
heat sources. In a forced cooling environment (30 CFM
minimum), power supplies may be placed 2 inches apart.
Summary :
18 AccelePort C/CON-8, C/CON-16 and C/CON-16 Rack Concentrators Connecting the Power Supply C/CON Concentrators The C/CON concentrator requires an external power supply (provided with the unit). Place power supply at least 4 inches from other power supplies or heat sources.
Tags :
supply,concentrator,other,concentrators,display,supplies,proided,adapter,part,plug,digi,switch,post